UTG PRO® 1″/2PCS MEDIUM PROFILE P.O.I® PICATINNY RINGS, A-RWU012515

$8999

Add more products worth $300.00 on your cart for free shipping* (Some conditions apply)

Only 2 left in stock

SKU: A-RWU012515 Category: Product ID: 6114

Description

• Proudly Designed and Made in USA

• Medium Profile P.O.I® (Precision Optics Interface) Rings Have a 28mm Center Height to Fit Optics with a 1″ Tube, and up to a 55mm Outer Objective

• The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings –

a) Progressively Machined for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interaction

b) Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Hold

c) Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations

• 2 Piece Ring Set, Each Equipped with 4 Top Torx Screws Designed with a 22mm Ring Width

• Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms

• Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize

• UTG PRO® Original Snag-free Contoured Profile with Reduced Weight and Size

 

NOTE: We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.

Additional information

Weight 0.445 lbs
Dimensions 6 × 3.5 × 1.25 in
Minimum 4 characters